Tankless Water Heater Repair Kansas City
Tankless Water Heater Repair Kansas City Troubleshooting
Usually, most of the issues that may accompany a tankless water heater, causing it to need a repair are external aspects. Here are a few of them:
The venting is not appropriate. The most common mistake is the use of typical B-vent, which can swiftly ruin the heat exchanger due to acidic condensation.
Check the gas supply line. Sometimes the supply line is undersized and was simply attached to the existing line size. The size specified in the setup handbook requires to be utilized.
The gas pressure is not appropriate. The working pressure should be from 5 to 10 1/2 inches WC for Natural Gas and 9 1/2 to 14 inches for Liquid Propane, depending on the design.
The incorrect type of gas that is being used – natural gas or liquid propane. It is not possible to use the non-specified kind.
Water flow or temperature variation issues. There are numerous things we will inspect to make sure they are working appropriately, like cleaning or replacing the input filter, examining the check valve, examining the seals in the faucets and looking to see if there is a cross flow somewhere that needs to be fixed.
Hard Water Problems: In areas where the water is extremely hard, de-scaling will be needed periodically.
Environmental concerns. The heaters ought to be set up in a clean area with access to combustion air that is free from dust, lint, grease, or chemicals.
Do not think twice to inform us of any issues you are having with your tankless hot water heater, or if you just really want some information and facts on deciding if having one would be a good fit for your residence.